The construction of greenhouse mainly adopts frame structure, which has high bearing capacity and long service life, and generally has the functions of heat preservation, ventilation, sunshade, insect prevention and so on. The span of the greenhouse is generally 7 ~ 9 meters, the shoulder height is 3 ~ 4 meters, and the top height is 5 ~ 6 meters. Because of the high structural strength, it can be built either as a single building or as a multi-building. The structure of the ordinary greenhouse is relatively simple, and the installation can be carried out according to the operating instructions. Before planting in the greenhouse, we need to do a series of work, such as the construction of the greenhouse, the consideration of the planting time of vegetables, the purchase of vegetable seeds in the greenhouse, and so on. In fact, if we want to make the income of planting in the greenhouse better, we also need to do some meticulous work on the fertility, diseases, pests and other factors in the field.
Whether you are in a car or other fixed pickup at close range, 4097CORE? The miniature gun microphone is a useful and unique solution. With compact shape and clear audio pick-up, the microphone can be quickly installed in a small space (such as squeezed on the sunshade of a car, sandwiched on the dashboard or placed under the table)
The key points of the building ecological energy strategy and design for the renovation of the new German parliament building lie in the technical application and energy strategy of ventilation and lighting. After the reconstruction, the output of carbon dioxide in the building has been reduced by nearly 94%. Through the set path, the air is filtered and cooled into the building, and then the hot air and waste gas are discharged upward by the two-story dome through the building technology; natural lighting is realized by an inverted cone light reflector and a 360-degree tongue-shaped sunshade device, which is equipped with an air pipe and a heat converter, and the tongue-shaped device can rotate according to the change of the solar height angle during the day. The energy strategy adopted in the reconstruction of the building is more radical, including not only the use of solar power, but also the use of renewable “biodiesel” generators to generate electricity, coupled with the storage and recycling of geothermal heat.
In addition to the outdoor camping folding car, GAC MOTOR APP also has a lot of equipment necessary for outdoor camping. For example, outdoor sunshade canopy, outdoor folding seats, outdoor camping tableware sets and outdoor picnic mats and so on. For those of you who like camping, come and buy it on GAC MOTOR APP.
3. The exterior ornaments of the car body mainly refer to decorative strips, wheel covers, signs and embossed words, etc., and accessories such as radiator masks, bumpers, lamps and rearview mirrors also have obvious decoration. 4. Car interior decorations include dashboards, ceilings, sidewalls, seats and other surface decorations, as well as curtains and carpets. Surface finishing materials such as natural fiber or synthetic fiber textiles, artificial leather or multilayer composite materials, skin foam and so on are widely used in cars. On the bus, there are a large number of decoration materials such as fibreboard, cardboard, engineering plastic board, aluminum board, pattern rubber board and composite decoration board. 5, body accessories door locks, door hinges, glass lifts, various seals, windscreen wipers, windwindow scrubber, sunshade, rearview mirror, handle, cigarette lighter and ash box, etc. Radio recorders and pole antennas are often installed in modern cars. QDKYTRGS
The exterior sunshade of the building is specially designed, which fully considers the difference between summer and winter, meets the enhanced shading performance in summer and the enhanced heat performance in winter, and greatly reduces the energy consumption of air conditioning and heating in the whole year. Figure 1 shows the exterior sunshade used in the building. The whole building adopts non-thermal bridge design, and the thermal bridge coefficient ψ a ≤ 0.01W/ (m ·K). Figure 2 is a simulation diagram of the temperature distribution of the thermal insulation effect of the peripheral structure nodes.
Near Xiaoshan Volkswagen lossless car audio modification, because the car audio is mostly installed in the upper part of the dashboard, in order to avoid sunlight, the effect of using sunshade is better. If the door and window sealing strip is not strict, it should be replaced, otherwise the loudspeaker is easy to rust and damage, or even cause short circuit to burn the main engine. The specific heat of the circuit board and plastic components in the car audio mainframe is different, so it is affected by the temperature change to a different extent. In the scorching sun, it is good to use the sunshade to resist the scorching sun and avoid the direct sunlight.
First-class package configuration (same color door handle, package driver and passenger auxiliary handle, front door lighting, upgraded floor console, heating steering wheel, dashboard LED ambient light, leather trimmed barrel seat, deluxe front door decoration panel, lighting pedal, pickup box lighting, 8-way electric front seat, power adjustable pedal, advanced package dashboard, rain sensitive windscreen wiper, rear door lighting, Rear seat lower locker, rear window defroster, sunshade with illuminated cosmetic mirror, general garage door opener)
Automobile interior decoration and supplies: dashboard, auxiliary dashboard, seat, door guard panel, internal cover, steering wheel, floor mat, floor glue, suitcase. Coat rack, sunshade panel, storage box, ashtray, gear, central control, automotive electronic system, safety information display system, interior lighting system, interior acoustic system, interior modification, vehicle sealing technology products, interior accessories, car carpets, safety seats, seat covers, headrests, handle covers, handboxes, anti-theft locks, seat belts, sunscreens and decorative products, surface coverings, curtains, sunshade products, etc.
Figure 3 is a schematic diagram of the patent application trend of the third-tier technology branch in the field of internal and external decoration. The growth trend of patent applications related to seat technology and headlamp technology is more obvious. The seat is the first component to evaluate whether the car is comfortable or not. Headlights are also an important part of safe driving. From the overall trend, the number of patent applications for the above technologies has increased rapidly since 2005. There is also a growth trend in dashboards and center consoles, rearview mirrors and bumpers, with slower growth in patent applications compared with seat and headlight technology. The number of technical applications such as sunshade panel and interior panel, radiator grille and spoiler is less, and the application trend is relatively flat.
Recycling second-hand glass bottle juice beverage production equipment at present, spray-free plastic has been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, instrument panels and other automotive parts in the automotive field. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics are generally synthesized from petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of renewable raw materials with low toxicity and low harm, greatly reduce the amount of VOCs volatilization in the car after being prepared into automobile interior parts. In addition, this bioplastic can be decomposed to facilitate subsequent recycling, so it is a more environmentally friendly type of plastic.